At the CISS GROUP production site (Russian Federation, Volgograd, Motornaya st. 35), modern metalworking equipment is installed, which allows to perform the entire range of work necessary for the manufacture of parts.
Our machine park consists of modern CNC machines, which allow us to perform metal machining with high precision and high speed. Our team consists of experienced engineers and programmers who model complex assemblies and parts in 3D and then write and optimize programs for CNC machines.
Production area: more than 1800 square meters;
Number of staff: more than 30 people;
Machine park: 5 units (equipment manufacturer SOLEX Company);
Office area: 200 square meters;
Painting area: 220 square meters;
Warehouse area: 300 square meters;
Below are pictures of our production center. To organize a technical audit, please send an e-mail or contact by phone with CISS GROUP Sales Director Artem Alexandrovich Glazkov ( AGlazkov@ciss.msk.ru +79774278757)
Production
Solex HM63TS - Horizontal CNC Milling Machining Center
CHARACTERISTICS
PROCESSING PARAMETERS
• Longitudinal movement of the table - axis X.-1000 mm
• Vertical movement of the headstock - axis Y-850mm
• Transverse movement of the column - axis Z-900 mm
• Distance from an end face of a spindle to the center of a table. - 200-1100 mm
SPINDLE
• Spindle taper - VT 50
• Maximum spindle speed - 4500 rpm
• Spindle drive power (post / 30 min) -18.5 / 22 kW
CHARACTERISTICS OF THE TABLE
• Table size - 630 x 630 mm
• Max. table load-1200 kg
• Number of pallets - 1 piece
ACCURACY
• Positioning accuracy along X/YIZ.- 0.010 mm
• Positioning repeatability along the X/YIZ axes - 0.006 mm
• Table indexing accuracy (B-axis) arc-6 sec
• Table indexing repeatability (B-axis) arc - 2 sec
Solex NL634SC - Slant Bed CNC Lathe
CHARACTERISTICS
PROCESSING PARAMETERS
• Max. swiveling diameter above bed - Ø 650 mm
• Max. swiveling diameter above the caliper - Ø 410 mm
• Max. processing length - 1000 mm
• Angle of inclination of the bed - 45 °
• Stroke X-330 mm
• Travel along the Z-axis - 1100 mm
SPINDLE
• Max. spindle speed - 2000 rpm
• Spindle drive power (post / 30 min) -15/18.5 kW
• Torque (constant / 30 min.) - 285/350 Nm
• Spindle nose type-A2-8
• Bar diameter - Ø 70 mm
• Spindle hole diameter - Ø 87 mm
C AXIS ON MAIN SPINDLE
• Positioning accuracy - 0.006 mm
ACCURACY
• Positioning along the X-axis - 0.012 mm
• Positioning along the Z-axis - 0.016 mm
• Repeatability X-0.006 mm
• Repeatability along the Z-axis. - 0.008 mm
NEWAY VNL-160T – CNC Turning and Milling Machining Center
CHARACTERISTICS
PROCESSING PARAMETERS
• Max. swivel diameter-Ø 1800 mm
• Max. processing diameter-Ø 1600 mm
• Max. workpiece height-1600 mm
• Stroke X-1050 mm
• Stroke Z-800 mm
SPINDLE
• Max. spindle speed-400 rpm
• Spindle drive power (post / 30 min)-37 kW
• Chuck diameter-Ø 1250 mm
ACCURACY
• Positioning along the X-axis - 0.030 mm
• Positioning along the Z-axis-0.030 mm
• Repeatability X-0.015 mm
• Repeatability along the Z-axis-0.015 mm
